AEEC Home | Training Index | Index | Top | Previous | Next

ECCJ / Text for Training Courses Thailand

Energy Conservation Technology (Electricity)
Toshihiko Harashima
Energy Conservation Center,Japan
July 25,2007
Table of Contents
    1.Energy Conservation Judgment Standard and Its Approach
    1.1. Composition of judgment Standard
    1.2. Energy Conservation Approach
    2. Air Conditioning Equipment
    2.1 Judgment Standard
    2.2 from energy conservation tuning case sheet
    2.3 Example of management standards for air conditioning equipment
    3. Power Receiving and distribution equipment
    3.1 Judgment Standard
    3.2 Energy Conservation of Power Receiving and Distribution System
    4. Electric Power Devices
    4.1 Judgment Standard
    4.2 Energy conservation of Electric Power Devices
    4.3 Energy Conservation of Compressors
    4.4 Judgment Standard on Lighting equipment, etc.
    5. Introduction of excellent energy conservation cases
1. Energy Conservation Judgment Standard and Its Approach
1.1.1 Composition of judgment Standard
1.1.1 Composition of judgment Standard
1.1.2 6 Fields of Judgment Standard (Reference Part)
    1. Rationalization of fuel combustion
    2. Rationalization of heating, cooling and thermal transmission
      2-1 Heating equipment, etc.
      2-2 Air conditioning equipment, hot water supply equipment, etc
    3. Recovering of discharged heat
    4. Rationalization of conversion from heat to power, etc.
      4-1 Equipment used only for power generation
      4-2 Co-generation equipment
    5. Prevent loss of heat due to radiation, thermal conduction, resistance, etc.
      5-1 Prevent loss of heat due to radiation, thermal conduction, etc.
      5-2 Prevent loss of heat due to resistance, etc.
    6. Rationalization of conversion from electricity to power, heat, etc.
      6-1 Electric power equipment, electric heating equipment, etc.
      6-2 Lighting equipment, elevators, office equipment, consumer products, etc.
1.1.3 Obligation to observe 4 items in each of 6 fields
    (1) Management
    Decides points for implementing the operation and management according to features, functions, etc. and set the management value, standard value, time, etc.
    (2) Measurement, recording
    Decide items to be measured and recorded, frequency of the measurement and recording, and implement them periodically.
    (3) Maintenance, inspection
    Decide points for doing maintenance, inspection, etc. and implement periodic maintenance and inspection, and record the results.
    (4) Measures for new installation
    Decide measures for new installation, renovation or renewal of equipment.
1.1.4 Energy intensity (or Energy unit consumption)
1.1.4 Energy intensity (or Energy unit consumption)
1/8
Next
AEEC Home | Training Index | Index | Top | Previous | Next
Copyright(C) ECCJ 1996-2019